Publicidad
Idiomas disponibles
Idiomas disponibles
floor strong enough to support it.
• The air conditioner has castors to aid placement, but it should only be rolled
EN
FR
on smooth, flat surfaces. Use caution when rolling on carpeted surfaces or
wood floors.
• The air conditioner must be placed within reach of a properly rated grounded
socket.
• Never place any obstacles around the air inlets or outlets of the air conditioner
and do not cover the appliances' intakes and outlets.
• Allow at least 45cm of around and above space away from the wall for efficient
working.
• The hose can be extended, but it is the best to keep the length to minimum
required. Also make sure that the hose does not have any sharp bends or
sags.
Install the exhaust hose
In the cool mode the air conditioner must be placed close to a window or opening
so that the warm exhaust air can be discharged outside.
1. First position the air conditioner on a flat floor and make sure there's a
minimum of 17.7" (45cm) clearance around the unit, and is within the vicinity
of a power source.
2. Extend either side of the exhaust hose and connect the hose inlet and hose
outlet to the two ends of the exhaust hose.
3. Slide the hose inlet into the air conditioner.
45 cm
12
12
Publicidad
