Qilive Q.6884 Manual Del Usuario página 13

Install the window slider kit
1. Check your windows' size and choose a fitting window slider.
2. Depending on the size of your window, adjust the size of the window slider.
Make sure there is no gap between the window and the window slider.
Depend on the shape of your window, select to assemble the window slider
vertically or horizontally.
Vertical
window
Window slider
3. Slide panel
• Parts:
A) Panel
B) Panel with one hole
D) Screw to lock window kit in place
• Assembly:
Slide Panel B into Panel A and size to widow width. Windows sizes vary. With
the width that your window requires to ensure that there are no gaps or air
pockets in the window kit assembly after installation.
• Lock the screw into the holes that correspond
Notes:
- The window slider kit has been designed to fit most standard vertical and
horizontal window applications, however, it may be necessary for you to
modify some aspects of the installation procedures for certain types of
windows. The window slider kit can be fastened with screws.
- If the window opening is less than the minimum length of the window slider
kit, cut the end without the hole in it short enough to fit in the window opening.
Horizontal
window
Window slider
13 13
EN