Publicidad
Idiomas disponibles
Idiomas disponibles
This air conditioner hasn't auto swing function. Adjust the horizon or vertical
deflectors manually to suitable position.
EN
FR
Sleep function
When in sleep mode, the air conditioner maintains the room at optimum
temperature without excessive fluctuations in either temperature or humidity
with silent operation. Fan speed is always at low, while room temperature and
humidity vary gradually to ensure the most comfortable level.
-
Make sure the air conditioner is in cool mode (refer to "Cool mode" section).
Then press the
-
Sleep function is not available in fan and dry mode.
-
When sleep function is activated, the screen brightness is reduced and the
low fan speed is selected automatically.
-
When the sleep function is activated, the set temperature (in cool mode)
automatically increases by 1°C (1°F) per hour within the initial 2 hours, then
the temperature remains unchanged. Sleep function runs for 8 hours, then
switches off automatically.
-
To deactivate sleep function, press one of the following buttons:
6. MAINTENANCE AND CLEANING
Attention!
Before cleaning, disconnect the power plug from the power outlet.
Do not use any corrosive detergent, wire brush, abrasive cleaner,
sharp object or metal to clean the appliance.
Water drainage
Drain
outlet
Drain
plug
When there is excess water condensation inside the appliance, the appliance
stops running and displays "
section), this indicates that the water condensation needs to be drained from
the product. This can be done manually (whenever the water tray is full) or on
a continuous basis.
• Unplug the appliance from the power source.
• Place a pan (not supplied) under the lower drain plug or carefully move the
appliance to a drain location.
button on the remote control to activate sleep function.
" (FULL TANK as mentioned in Self-diagnose
16
16
Drain
outlet
Drain
plug
Drain hose
,
, or
.
Publicidad
