Descargar Imprimir esta página

Qilive Q.6884 Manual Del Usuario página 17

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
• Remove the lower drain plug from the back of the appliance. Water will be
drained out and collected in the pan.
• After the water is drained, replace the lower drain plug firmly.
Continuous water drainage via a drain hose:
• Unplug the appliance from the power source.
• Remove the drain plug. While doing this, some residual water may spill, thus
have a pan (not supplied) to collect the water.
• Attach the drain hose to the hole. Place the open end of the hose directly
over a suitable water drainage area. The water can be continuously drained
through the hose.
Notes:
-
Make sure the hose is securely connected so there are no leaks. Direct the
hose toward the drain.
-
Make sure that there are no kinks in the hose that will stop the water flowing.
-
When the continuous drain hose is not used: Drain plug needs to be firmly
installed to prevent leakage.
-
Please be sure that the hose should not be bent and higher than the drain
outlet, or the water tank may not be drained.
Middle drainage
Drain plug
When the appliance is running in dry mode, follow below instructions to drainage.
• Unplug the appliance from the power source.
• Remove the drain plug. While doing this, some residual water may spill, thus
please have a pan to collect the water.
• Connect the drain hose.
• The water can be continuously drained through the hose into a floor drain.
Note:
-
Please be sure that the hose should not be bent and higher than the drain
17
17
Garden hose or
drainage hose
EN

Publicidad

loading