Publicidad
Idiomas disponibles
Idiomas disponibles
• In households with animals: You will have to periodically wipe down the grille
to prevent blocked airflow due to animal hair.
• Clean the appliance using a lightly damp, lint-free cloth and mild detergent.
Dry the appliance with a dry, lint-free cloth.
• Run the appliance on FAN mode for 12 hours in a warm room to dry it and to
prevent mould (every 6 months or before storing the appliance).
• Before each season, check and make sure the power cable and plug are
undamaged and the earth system is efficient.
• After each season, empty the internal circuit completely of water. Remove the
drain plug, run off all water left into a basin. When all water has been drained,
replace the drain plug in place.
7. TROUBLESHOOTING
SELF-DIAGNOSIS
The appliance has a self-diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display.
Error code
PROBE FAILURE
(Sensor is damaged.)
FULL TANK
(Safety tank is full.)
Problem
The appliance can
not be turned on.
• If this is displayed, contact your local
authorized service center for help.
• Empty the internal safety tank, following
the instructions in the "Maintenance and
cleaning" section.
Cause
• It is not plugged into the
mains.
• The internal safety device
has tripped.
19
19
Possible solution
Solution
• Plug the appliance into
the mains.
• Wait for 30 minutes, if
the problem persists,
contact your service
center.
EN
Publicidad
