Publicidad
Idiomas disponibles
Idiomas disponibles
Fan mode
When using the appliance in this mode, the air hose does not need to be
attached.
To set this mode correctly:
• Press the "
" button a number of times until the "Fan" symbol appears.
• Select the required fan speed by pressing the "
Two speeds are available: High/Low
Dry mode
• This mode is ideal for reducing room humidity in spring, autumn
or rainy days. Before using the dry mode, the appliance should
be prepared in the same way as for cool mode, with the air
exhaust hose attached to enable the moisture to be discharged outside.
• To set this mode correctly, press the
indicator
lights up, the screen displays
• In this mode, fan speed is selected automatically by the appliance.
Setting the timer
The appliance can be programmed to be switched on or off automatically (up
to 24 hours).
To set a start up timer
-
Turn on the air conditioner, choose the mode you desire, for example cooling,
24°C and high fan speed. Turn off the appliance.
-
Press the
button. The screen will display 1-24 hours.
-
Press the
button repeatedly to adjust the time. After that, wait about 5
seconds, the timer will be activated. The timer indicator
-
To cancel the start-up timer, press the
turned off.
To set a shut down timer
-
When the appliance is running, press the
1-24 hours.
-
Press the
button repeatedly until the desired time is displayed. Then wait
about 5 seconds, the timer will be activated, and the timer indicator
up.
-
To cancel the shut down timer, press the
will light off.
Switch the temperature unit
Hold down
and
between celsius and fahrenheit system.
USB charging
You can use the USB charging port on the air conditioner to charge your mobile
phone or other devices. To enable or disable the USB charging function, press and
hold the
for about 10 seconds. When this feature is activated, the air conditioner
will beep once. When this feature is deactivated, the air conditioner will beep twice.
To enable or disable the USB charging function only be in standby mode,
Swing function
button a number of times until the dry
buttons for 3 seconds. The temperature will be switched
15
15
"button.
.
is lit up.
button. The timer indicator
button. The screen will display
button. The timer indicator
EN
is
lights
Publicidad
