Descargar Imprimir esta página

Brandt BOP2112B Manual De Instrucciones página 100

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 121
SAFETY INSTRUCTIONS
has cooled down. To unscrew the
view port and the light, use a rub-
ber glove, which will make disas-
sembly easier.
The electrical plug must re-
main accessible after installation.
— It must be possible to dis-
connect the appliance from the
power supply, either using a plug
or by fitting a switch on the fixed
wiring system in accordance with
installation rules.
— If the power cable is damaged,
it should be replaced by the manu-
facturer, its after-sales service de-
partment or by a similarly qualified
person in order to avoid danger.
— This appliance may be installed
either under a worktop or in a ca-
binet column, as indicated on the
installation diagram.
— Centre the oven in the unit so
as to ensure a minimum distance
of 10 mm between the appliance
and the surrounding unit. The ma-
terial of the unit supporting the ap-
pliance must be heat-resistant (or
covered with a heat-resistant ma-
terial). For greater stability, attach
the oven to the unit with 2 screws
through the holes provided on the
side panels.
— In order to avoid overheating,
5
the appliance must not be installed
behind a decorative door..
— This appliance is designed to
be used for domestic and similar
applications such as:
Kitchen areas for the staff of
shops, offices and other profes-
sional premises; Farms; Use by
clients of hotels, motels and other
residential type establishments;
guest house type environments.
— The oven must be turned off
when cleaning inside the oven.
Do not modify the characteristics
of this appliance; doing so could
be dangerous.
Do not use your oven as a larder
or to store any items after use.

Publicidad

loading