Brandt BOP2112B Manual De Instrucciones página 102

Installing your appliance
ELECTRICAL CONNECTION
Your oven must be connected with a (standard)
power cable with 3 conductors of 1.5mm2 (1 live
+ 1 neutral + earth) which must be connected to
a 220-240V~ single-phase grid by means of a 1
live + 1 neutral + earth CEI 60083 standard power
socket or via an all-poles cut-off device in com-
pliance with the installation rules.
WARNING
The safety wire (green-yellow) is connected
to the appliance's
connected to the earth terminal of the elec-
trical set-up.
The fuse in your set-up must be 16 amperes.
We cannot be held responsible for any accident
resulting from inexistent, defective or incorrect
earthing.
• Prior to first use
Before using your oven for the first time, heat it
with the door closed for about 15 minutes on the
highest temperature. to break in the appliance.
The mineral wool surrounding the oven cavity may
initially give off a particular odour due to its com-
position. You may also notice smoke development.
This is normal.
terminal and must be
blue
B l a c k , b ro w n
or red
green yellow
Neutral
(N)
Phase
(L)
Terminal
7