Ec Type-Examination Certificate - WEG CFW500-SFY2 Instrucciones Y Manual De Seguridad

Safety

EC Type-Examination Certificate

Reg.-No.: 01/205/5723.01/20
Product tested
Type designation
Codes and standards
Intended application
Specific requirements
It is confirmed, that the product under test complies with the requirements for machines defined in Annex I of the EC
Directive 2006/42/EC.
Valid until 2024-09-25
The issue of this certificate is based upon an examination, whose results are documented in
Report No. 968/FSP 1886.01/20 dated 2020-03-30.
This certificate is valid only for products which are identical with the product tested.
Köln, 2020-03-30
www.fs-products.com
10 | CFW500
Safety Functions "Safe Torque Off
(STO)" and "Safe Stop 1 time
controlled (SS1-t)" within Frequency
Inverters
Safety Module CFW500-SFY2 for the CFW5XX inverter series.
Details see current "Revision List"
EN 61800-5-2:2017
EN 61800-5-1:2007 + A1:2017
EN 61800-3:2018
EN ISO 13849-1:2015
The safety functions STO and SS1-t comply with the requirements of the relevant
standards (Cat. 4 / PL e acc. to EN ISO 13849-1, SIL 3 / SIL CL 3 acc. to
EN 61800-5-2 / IEC 61508 / EN 62061) and can be used in applications up to
Cat. 4 / PL e acc. to EN ISO 13849-1 and SIL 3 acc. to EN 62061 / IEC 61508.
The instructions of the associated Installation and Operating Manual shall be
considered.
Notified Body for Machinery, NB 0035
Certificate
WEG DRIVES &
holder CONTROLS -
AUTOMAÇÃO LTDA
AV. Pref. Waldemar
Grubba, 3000
89256-900 Jaraguá do Sul
/ SC
Brazil
EN 62061:2005 + AC:2010 + A1:2013 +
A2:2015
IEC 61508 Parts 1-7:2010
EN 60204-1:2018 (in extracts)
Dipl.-Ing. Eberhard Frejno