Module - WEG CFW500-SFY2 Instrucciones Y Manual De Seguridad

F0160 - Safety Functions Module in Fault State
Description:
It indicates to the user that the safety functions module is in the fault state.
Possible Causes/Correction:
Incorrect installation of the safety input circuit.
„
Discrepancy between the safety inputs (STO1 and STO2) greater than 1 s.
„
Incorrect configuration of safety input type (dry contact or OSSD) on DIP switches S1.
„
Safety functions module programming DIP switches (S2) activated in operational state.
„
Incorrect programming of the safety function or programming timeout (2 min).
„
Electronic circuit of the safety functions module damaged.
„
F0161 - Safety Functions Module Communication Fault
Description:
It indicates to the user that the inverter has lost communication with the safety functions module.
Possible Causes/Correction:
Poor contact between the safety functions module and the frequency inverter.
„
Damage in the electronic circuits of the frequency inverter control or the safety functions
„

module.

Maintenance and Troubleshooting
CFW500 | 25