Horizon Fitness T202 Manual Del Propietário página 12

GoAL CEnTEr™
Research shows that those who create and track their fitness goals, on average, achieve greater success than those who do not.
Because your new treadmill is equipped with Horizon's exclusive gOAL CENTER
step towards achieving your fitness goals. gOAL CENTER
will allow you to track your fitness goals over time, without the need for paper journals or logs. Read further to learn about how gOAL
CENTER ™ can help motivate you to enhance your performance.
GoAL CEnTEr™ SETUP
1) Select USER 1 or USER 2 using the /
2) Press and hold gOAL CENTER ™ for approximately five seconds.
3) Press SELECT TARgET key to select time, distance or calorie goal.
4) Use / or + / – keys to select goal value and press ENTER.
5) Use the / or + / – keys to select the NUMBER OF DAYS to complete the goal.
6) Press ENTER again to exit the setup mode.
NOTE: These steps can also be used to erase an existing goal and set a new one.
ViEWinG GoAL ProGrESS
When logged into your user profile, you can view progress toward your goal by pressing the gOAL CENTER
the remaining time, distance or calories, depending on the goal selected and will also scroll the time remaining to achieve that goal.
noTE: For workout data to accumulate towards a user's goal, you MUST first select that user before beginning a workout.
22
T202-T203-CT7.1-OM-rev1.4.indd 22-23
™ Performance Tracker, you've taken an important
™ is innovative new software, integrated into your treadmill console, that
or + / – keys and press ENTER.
key. The console will scroll
™
To rESET THE ConSoLE
Hold STOP key for 3 seconds.
FiniSHinG YoUr WorKoUT
When your workout is complete, the monitor display will flash "FINISHED" and beep. Your workout information will stay displayed on
the console for 30 seconds and then reset.
CLEAr CUrrEnT SELECTion
To clear the current program selection or screen, hold the STOP button for 3 seconds.
USinG YoUr CD / MP3 PLAYEr
1) Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN JACK on the top right of the console and the headphone
jack on your CD / MP3 player.
2) Use your CD / MP3 player buttons to adjust song settings.
3) Remove the AUDIO ADAPTOR CABLE when not in use.
4) If you don't want to use the SPEAKERS, you can plug your headphones into the AUDIO OUT JACK at the bottom of the
console.
23
8/5/10 8:32 AM