Adjusting The Low-Pass Fi Lter For The; Subwoofer; Adjusting The Loudspeaker Type; User Settings - Blaupunkt Buenos Aires 200 Instrucciones De Manejo

Sound settings
u If necessary, briefl y press the AUD button 9
to select the "V-OFF" menu item.
u Turn the On/Off button 4 to perform the
setting.
u Briefl y press the MENU button ? to exit the
menu.
Adjusting the low-pass fi lter for the

subwoofer

This is possible only if the setting SWPRE SW is se-
lected in the user menu. Settings: THRU (no low-
pass fi lter), 80H (Hz), 120H (Hz), 160H (Hz).
Press the AUD button 9 for approx. 2 sec-
u
onds.
The "LPF" menu item is selected.
Turn the On/Off button 4 to perform the
u
setting.
u Briefl y press the MENU button ? to exit the
menu.

Adjusting the loudspeaker type

Adjust the loudspeaker type connected to the
device to optimise the sound. Settings: SP OFF
(no type selected), SP 5/4 (loudspeaker with 4 or
5 inch diameter), SP 6*9/6 (loudspeaker with
6 or 6x9 inch diameter), SP OEM (original Blau-
punkt loudspeaker).
If necessary, press the On/Off button 4
u
repeatedly until "NO SRC" is selected.
u Briefl y press the AUD button 9.
u Turn the On/Off button 4 to change be-
tween the settings.
u Briefl y press the AUD button 9 to exit the
menu.
12

User settings

Calling and exiting the user menu

Press the MENU button ? for approx. 2 sec-
u
onds to open the menu.
u
Press the button AM
repeatedly until the desired menu item is
selected.
u
Perform the setting (see the next section).
u
Briefl y press the MENU button to exit the
menu.

Performing settings in the user menu

AUTO1 / AUTO2 / MANUAL
Possible only in radio mode: Select the mode for
setting stations. Settings: AUTO1 (station seek
tuning), AUTO2 (changing between stored sta-
tions), MANUAL (adjusting the frequency manu-
ally).
u
Press the button
between the settings.
CRSC
Possible only in FM radio mode: Switch automatic
mono playback for radio stations on or off in case
of poor reception. Settings: ON, OFF.
u
Press the button
between the settings.
SCL
Switching automatic display of text as scrolling
text on or off. Settings: AUTO (On), MANU (Off).
u
Press the button
between the settings.
DEMO
Switching demo mode on or off. Settings: ON,
OFF.
u Press the AUD button 9 for approx. 2 sec-
onds to change between the settings.
User settings
=/ FM >
2 / 3 to change
2 / 3 to change
2 / 3 to change