kChanging the mode settings
4
Once copying is com plet ed, t he m essage " COM PLETE"
is displayed.
To copy images to another floppy disk, select "CONTINUE" with the
control button and repeat the operations in steps 2 through 4 above.
To discontinue copying, select "EXIT" with the control button.
Notes
• When you copy to the floppy disk which is a small remaining capacity,
"DISK FULL" may appear on the LCD screen.
•To discontinue copying on a floppy disk halfway (in the middle of the above
steps from 1 through 4), turn off the camera.
DELETE
Select this item to delete a displayed image(s)
To delete an image(s), select the desired delete option from the menu
while the image(s) is displayed on the LCD screen.
In SINGLE screen mode
<OK/ CANCEL>
•Select OK to delete displayed image.
•Select CANCEL to cancel deleting image.
In INDEX screen mode
<ALL/ SELECT>
•Select ALL to delete all the images on the floppy disk.
•Select SELECT to delete selected images.
1 Use t he cont rol but t on t o display t he red
im age you w ant t o delet e.
The selected image number reverses color. To cancel selection, press
the control button again. The image number display returns to
normal.
2 Select " ENTER" w it h t he cont rol but t on, t hen press it .
To cancel deleting image, select "CANCEL" with the control button,
the press it. The screen returns to the menu screen.
Notes
• Once you delete an image, you cannot restore it. Check the images to delete
carefully before deleting them.
• Even when you select "ALL", you cannot delete the protected image.
• When you select "SELECT" , you cannot select a protected image.
28-GB
Downloaded from:
https://www.usersmanualguide.com/
m ark at t he
B