GB
7.8.2 Lower freezer drawer
1. Pull out to the lower freezer drawer to maximum
extent (Fig. 7.8.2).
2. Pull out the freezing tray(A) to stop position, lift
and remove.
3. Lift the drawer (B) until it is separated from the
support block, push it into the freezer and tilt it to
take out.
In order to insert the freezing tray and drawer, the
above steps are carried out in reverse order.
7.9 Pre-freezing tray
The lower freezer drawer is equipped with a pre-freez-
ing rack (Fig. 7.9). Fresh frozen food can be separated
from already frozen, so that a smooth freezing process
can take place and freezing food will not defrosted.
After rearrangement of frozen food these compart-
ments can be used for easy storage of small parts such
as herbals, ice cream.
7.10 Fresher Pad
The Fresher Pad (Fig. 7.10) can be used for:
1. Quick freezing
By using the Fresher Pad in the freezer compartment,
food put on this pad will be frozen three times faster
than in ordinary freezer. The zone of maximum ice
crystal formation will be minimized; the quality of food
will be saved:
▶ Put the Fresher Pad in the upper freezer drawer in
the respective hole and place the food on the side
printed with "Fresher Pad".
2. Quick thrawing
By using the Fresher Pad outside the appliance food will be thrawn five times faster than
without pad because:
▶ allow the Fresher Pad to cool down at ambient temperature and put it on a flat surface
outside the appliance. Place the food on the side printed with "Fresher Pad".
Notice: Fresher Pad
▶ Do not touch the aluminium part of the Fresher Pad when using it in the freezer com-
partment. Your hands may freeze onto the surface. Wear gloves.
▶ Please keep the fresher pad dry when you put it into the freezer.
7- Equipment
A
B
7.8-2
B
7.9
7.10
23