GB
MT
Symbols / Instructions on the
implement
WARNING!
These Instructions must be read!
Danger of injury due to flung-out
material! Keep bystanders well
away from the implement.
Danger of electric shock
if the power cable is dam-
aged! Always ensure that
the power cable is kept well
away from the implement
and its cutting tools!
CAUTION – Sharp tools: Ensure
that the hands and feet are kept
well away from the cutting tools.
The cutting cylinder continues to
rotate briefly after the motor has
been switched off!
Always disconnect the plug from
the mains prior to maintenance
work or if the power cable is
damaged!
Caution with steps! Turn off
the power when the imple-
ment is to be carried across
steps!
Noise level ratings L
105
Protection Class II
Electrically powered implements
must not be disposed of with the
domestic waste
44
Remove any soil residue from the springs
of the impact protection cover and/or the
housing to ensure that the cover closes
correctly. When operating without the coll-
ection basket, the impact protection cover
must be completely closed.
Symbols in the manual
General safety instructions
in dB(A).
Operating the implement:
WA
Warning symbols with informa-
tion on damage and injury pre-
vention.
Instruction symbols (the instruc-
tion is explained at the place of the
exclamation mark) with information
on preventing damage.
Help symbols with information on
improving tool handling.
This implement can cause seri-
ous injuries if it is not properly
used. Please read these Operating
Instructions carefully and familiar-
ize yourself with all the control
elements before operating this
implement. Keep these Operating
Instructions in a readily accessible
place so that this information is al-
ways at your disposal.
WARNING! The implement can
cause serious injuries.
How to a avoid accidents and inju-
ries: