Descargar Imprimir esta página

FLORABEST FLV 1300 A1 Traduccion Del Manual De Instrucciones Originales página 48

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

GB
MT
Functional parts
The most important func-
tional parts are illustrated
on the cover page.
A
1 Unlocking button
2 Power cable (10 m)
3 Starting lever
4 Upper handle bar
5a+b 4 screws and 4 wing nuts to se-
cure the bar
6 Collection bag
7 Handle on the Collection bag
8 Lower bar
9 Impact protector
10 Implement case
11 2 wheels
12 2 rear wheels
13 Setting button
14a+b 2 cable clamps
15 2 centre bars
16 Electric cable
17 Spanner
18 Tool holder
19a Cable strain relief
19b Tension adjuster bracket
20 Aerator cylinder with sprung
tines
21 Verticutor cylinder with knives
Functional description
The verticutor and lawn aerator has two
easily exchangeable work cylinders:
An aerator cylinder made of hard plastic
with vertically rotating sprung tines, and a
verticutor cylinder with vertically mounted
high-grade steel knives.
The implement features a high-quality
plastic case with collection bag and a
handle bar with a folding function. Please
refer to the subsequent descriptions for
the actual functions of the individual con-
trol elements.
48
Assembling
instructions
Prior to any work on the implement
always disconnect the plug from
the power socket!
Extent of the delivery
Carefully unpack the implement and
check that all the subsequently listed
parts are complete:
Implement case with verticutor cylin-
der and impact protector
Aerating cylinder
Upper handle bar complete with start-
ing lever, power plug, unlocking button
and firmly mounted power cable
Lower bar
2 centre bars
Collection bag
Cable strain relief
2 cable clamps
Mounting accessories:
- 2 Philips screws, 4 screws and 4
wing nuts to fasten the bar
- Spanner to change the cylinders
Ensure during assembly that the
power cable is not squeezed and
that it has sufficient play.
Assembling the handle bar
B
1. Insert the lower bar (8) into the
implement case (10) and screw
it on with the two Philips screws.
2. Secure the two centre bars (15)
to the lower bar (8) with the
screws and wing nuts (5a).
The two centre bars can be se-
cured in two positions to adjust the
handle bar to your height.

Publicidad

loading