Publicidad
Idiomas disponibles
Idiomas disponibles
aerating or verticuting the individual
lanes should always overlap by a few
centimetres. Dwelling too long at the
same place while the implement is
running can damage the grass sward.
•
To ensure that the extension cable
is not an impediment, turn the imple-
ment in such a manner that the cable
strain release on the bar always faces
the side that has been treated.
After work and to transport the im-
plement disconnect the power plug
and wait until the cylinder is stand-
ing still.
•
Adjust the transport position 0 setting
(see "Setting the Working Position")
when transporting the implement.
•
Lift the implement to transport it over
steps and sensitive surfaces (e.g.
tiles).
•
Always clean the implement after
each use (see "Cleaning, Mainte-
nance, Storage").
•
After having treated lawns with dense
moss growth, it is advisable to reseed
the lawn so that it can regenerate it-
self quicker.
Exchanging the cylinder
Switch off the implement, discon-
nect the mains plug and wait until
the cylinder is standing still.
Wear gloves when handling the cyl-
inder.
E
1. Turn the implement over.
2. Take the spanner (17) out of the
holder (see
3. Release the fastening screw (25)
and fold the bearing cover (26)
away.
4. Tilt the cylinder upwards and pull
F
the shaft (27) out of its seat.
A
No. 18).
5. Insert the new cylinder by revers-
ing the sequence. Ensure that
the flattened side of the bearing
shell (28) is first inserted in the
bearing.
The cylinder has been correctly
mounted if the green pin (29) on the
bearing shell (28) passes through
the window in the bearing cover.
Cleaning, maintenance,
storage
Work that has not been described
in these Instructions must be
carried out by a servicing agency
authorised by us. Only use origi-
nal parts.
Wear gloves when handling the cyl-
inder.
Prior to all maintenance and clean-
ing work always switch off the im-
plement, disconnect the plug from
the power socket and wait until the
cylinder is standing still.
General cleaning and mainte-
nance work
Do not jet water onto the imple-
ment and do not clean it under
flowing water. This would result
in the danger of an electric shock
and the implement could be dam-
aged.
•
When work has finished remove plant
residues adhering to the wheels, in-
side the ventilation opening, the grass
ejector opening and the cylinder. Doe
not use hard or pointed objects for this
purpose as they could damage the
implement.
GB
MT
51
Publicidad
