Mettler Toledo FiveEasy FE20 Instrucciones De Manejo página 8

Installation
3. Installation
Carefully unpack the meter. Keep the calibration certificate in a safe place.
Insert the right adapter clip into the power adapter slot:
3.1 Installing the electrode arm (optional for FE20)
The electrode arm can be fastened to FiveEasy™ on the left or the right side.
. Remove the electrode stand rubber cover on that side of the bench meter where you prefer the stand.
Keep the cover in a safe place;
2. Insert the electrode stand firmly into the opening as shown;
3. Fix the opening of the arm upon the stand from above, adjust it to a moderate height.
3.2 Installing the batteries (FG2)
4
Five_pH.indb 4
Cinch
METTLER TOLEDO FiveEasy™ / FiveGo™ pH meter
BNC
12.03.2007 15:45:22