Domo DO10140 Manual De Instrucciones página 47

USE
CONTROL PANEL
3
1. POWER touch
To turn the unit off or on.
2. "+" and "-" touch
Use these touches to select the temperature. The temperature can be set between 17°C and 30°C. When
pressing both buttons at the same time you can switch between "°C" or "°F".
3. MODE- touch
With this touch you can select the desired function. Every time when pressing this touch the function will
change : COOL – DRY – FAN. The related indication light will turn on on the control panel. If you choose
the FAN setting, the ventilation blows on the automatic position. You can only adapt the ventilation speed
with the remote control.
4. LED display
Will show het temperature selections. When the "dry or "fan" mode is selected, the display will show the
room temperature.
REMOTE CONTROL
When using the remote control make sure that you always aim
it towards the apparatus. If you don't do this, you can briefly aim
the remote control towards the apparatus and press the ON-OFF
button.
When the apparatus receives a signal of the remote control you
hear a beep. The remote control must be used within an eight-
metre radius around the apparatus.
1. ON/OFF ON/OFF touch
To turn the unit off or on.
MODE
2. MODE- touch
With this touch you can select the desired function. Every time when pressing this touch the function will
change : COOL – DRY – FAN. The related indication light will turn on on the control panel.
FAN
3. FAN touch
With this touch you can select the fan speed : LOW
www.domo-elektro.be
Remote LED Screen Indicators
Remote LED Screen Indicat
Transmission Indicator
2
Lights up when remote sends
signal to unit
MODE display
MODE display
Displays the current
Displays the current
mode, including:
mode, including:
AUTO
AUTO
COOL
COOL
DRY
HEAT DRY
FAN HEAT
FAN
1
2
3
4
FAN SPEED display
FAN SPEED display
Displays selected FAN SPEED:
Displays selected FAN SPEED:
HIGH,
or LOW
– HIGH
or LOW
This display is blank when
This display is blank when
set to AUTO speed.
set to AUTO speed.
1
Transmission Indicator
Lights up when remote sen
signal to unit
ON/OFF display
ON/OFF display
Appears when the unit is turne
and disappears when it is turne Appears when the
and disappears wh
TIMER ON displa
Displays when TI
ON is set
5
MED,
HIGH, MED,
– AUTO.
Temperature/T
Displays the se
when using TIM
DO10140
TIME
Displa
ON is
6
7
8
9
SILENT
Not availa
Tem
Dis
47
wh
Temperature
Timer settin