Domo DO10140 Manual De Instrucciones página 50

Idiomas disponibles

Shortcut

With this button you can set and switch on a preferential setting.

If you use a certain setting more often, you can set this by pressing the SHORTCUT button for three

seconds. The apparatus then remembers the settings that are switched on at the moment of pressing.

These settings can include: the user setting (MODE), set temperature, ventilation speed (FAN) and

possibly also the SLEEP setting.

The moment you press the SHORTCUT button, the apparatus will work at the previously determined

settings.

CLEANING AND MAINTENANCE

DRAINING

Permanent drain

During the "dry" mode you can use a permanent drainage.

Remove the drain plug and the rubber top.

Attach the drain hose on the drain.

Make sure the water is drained in a save and permanent way.

Drain code P1

When you don't use the permanent drain, the non recycled condensation water, will be stored in the

water tank.

When the water tank is full a few beep signals will be heard and on

the display the code P1 will appear. The "cool" or "dry" mode will end

automatically. The fan will continue to operate, this is normal.

Move the unit over to a place where you can easily drain the water.

Remove the drain plug at the bottom of your unit (A) and drain the

water.

After fully draining the water tank, place the drain plug back on the drain

opening.

Restart the unit, make sure the error code P1 is no longer displayed.

When the code doesn't disappear, try turning off and on the unit a few

times. When the error code continues, please contact the after sales

service.

NOTE : always make sure to install the drain plug, before turning the

unit back on.

DO10140