Descargar Imprimir esta página

Domo DO10140 Manual De Instrucciones página 51

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
CLEANING
·
Always remove the plug from the socket before cleaning the unit.
·
Never use any chemical or abrasive products to clean the unit.
·
Never clean the unit with water or any other liquid, this can cause electrocution.
·
When the power cord is damaged it must be repaired or replaced by the after sales surface of the
manufacturer or by a qualified person.
Air filter
·
Clean the air filter at least ever 2 weeks. To make sure the air
conditioning can operate in optimal conditions.
·
Clean the air filter in lukewarm water with a bit of detergent.
Rinse the filter thoroughly and let it dry.
·
Make sure the filter is completely dry before placing it back in to
the air conditioning.
Air conditioning body
Use a damp, soft cloth and a bit of mild detergent, to clean the
outside of the unit. Make sure the unit is thoroughly dried afterwards.
Storing
Before storing the unit for a longer period of time, please follow the next steps:
·
Drain all the water from the appliance.
·
Afterwards turn on the unit in the "fan" mode for half a day. Make sure the unit is placed in a heated
room. This will dry the unit completely and prevent the forming of mold.
·
Turn off the unit, remove the plug from the socket and remove the batteries from the remote control.
·
Clean the filters and place them back in the unit.
·
Store the unit in a dry, dark place.
POSSIBLE PROBLEMS AND THEIR SOLUTIONS
The appliance isn't working when pressing the on/off touch.
·
The error code P1 is displayed , drain the water from the air conditioning.
·
The room temperature is lower than the selected temperature. Adjust the selected temperature.
The room is not cool enough.
·
The windows and doors aren't closed. Make sure all windows and doors are closed.
·
There are heat sources in the room. Remove all heat sources if possible.
·
The air outlet hose is not connected or blocked. Attach the hose and check if there is no blockage.
·
The selected temperature is too high. Adjust the selected temperature.
·
The air filter is dirty. Clean the air filter.
The appliance is making too much noise or is causing vibrations.
·
The floor is not level or flat. Place the appliance on the flat and level surface if possible.
·
The air filter is dirty. Clean the air filter.
Your appliance makes a gurgling sound
·
The sound is produced by the refrigerant in your appliance, this is normal.
www.domo-elektro.be
51
DO10140

Publicidad

loading