Klarstein AMAZONIA 8 Manual Del Usuario página 46

EN
46
Installing the water drain
Insert the drain hose into a drain pipe at least 4 cm in diameter or drain the water into a
sink. Ensure that the drain hose is not bent or kinked. Do not immerse the free end of the
hose in water to avoid backflow. Fix the drain hose either as in position A or B.
Back of the
dishwasher
Mains cable
Note: Secure the drain hose to the drain using the hose clamp supplied so that it does
not move and waste water runs out.
Water inlet
Drain pipe