HP Photosmart 5520 Serie Manual Del Usuario página 4

Networked printer use
Change from USB to wireless network connection
If you initially set up your printer using a USB connection to your computer, you can switch the connection to a
wireless network connection by following these steps.
Windows
To change from USB to wireless connection:
1. From your computer, click Start > All Programs >
HP > HP Photosmart 5520 series >
Printer Setup & Software.
2. Click Convert a USB connected printer to
wireless. Keep your USB cable connected until
prompted to disconnect it.
3. Follow the instructions on the screen.
Share your printer with multiple computers
If you already have your printer connected to your wireless network and want to share it with the other
computers connected to the same network, you need to install the printer software on other computers. During
the software installation, select the Wireless connection when prompted, and then follow the instructions on
the screen to finish installing the printer software.
Connect wirelessly to the printer without a router
HP Wireless Direct allows your Wi-Fi devices (for example: computers or smartphones) to print directly to
your printer wirelessly, without a wireless router, from your Wi-Fi enabled devices. To set up and use Wireless
Direct:
1. From your printer's control panel, touch the Wireless button.
2. Touch Settings.
3. Touch Wireless Direct, touch On (No Security) or On (With Security).
Note: If you turn on security, only users with the password will be able to print wirelessly to the printer. If
you turn off security, anyone with a Wi-Fi device within Wi-Fi range of the printer will be able to connect
to the printer. HP recommends that you turn on security for Wireless Direct.
4. Touch Display Name to display the Wireless Direct name.
5. Touch Display Password to display the Wireless Direct password if you have the Wireless Direct security
on.
6. From your wireless computer or mobile device, turn on the Wi-Fi radio, search for and connect to the
Wireless Direct name (for example: HP-Print-xx-Photosmart-5520). Then print as you normally do from your
computer or mobile device.
If you have Wireless Direct security on, enter the Wireless Direct password when prompted.
Note:
• If you want to print from a mobile device, you need to have a print application on your mobile device.
• If you want to print from your computer, you need to install the printer software.
• The Wireless Direct connection is available even if the printer is also connected to a wireless home
network.
• You cannot access the Internet through the Wireless Direct connection.
Mac
To change from USB to wireless connection:
1. From your printer's control panel, touch the
Wireless button.
2. Touch Wireless Setup Wizard.
3. Follow the steps in the Wireless Setup Wizard to
connect the printer.
4. Use HP Setup Assistant in Applications/Hewlett-
Packard/Device Utilities to change the software
connection to this printer to wireless.
4