Publicidad
Idiomas disponibles
Idiomas disponibles
3 YEARS
L I M I T E D WA R R A N T Y
1. INTRODUCTION
1.1 SCOPE
This power hand tool is designed for cutting wood and mild steel materials.
This product is intended for commercial use and has the quality and features to meet and exceed
the expectations of the most demanding user. Any application other than the one for which it was
designed is considered improper use.
1.2 HANDLING AND STORAGE
Care must be taken when handling this product. Dropping this power tool could have an e ect on
its accuracy and could also cause personal injury. This product is not a toy and must be respected.
- Environmental conditions can have a detrimental e ect on this product if neglected. Exposure to
moist air can gradually corrode components. If the product is not protected against dust and
debris, the components will clog. If it is not cleaned and maintained correctly or regularly, the ma-
chine will not perform at its best.
• Sound pressure level at the workstation in accordance and declared with 1EC62841.
The typical noise level is determined in 1EC62841.
2. SAFETY AND HEALTH INFORMATION
2.1 GENERAL SAFETY INSTRUCTIONS FOR THE USE OF THE ELECTRIC TOOL
When using any type of power tool, there are steps that must be taken to ensure that you, as a
user, remain safe.
Common sense and respect for the tool will help reduce the risk of injury.
Read the instruction manual completely. Do not attempt to perform any operations until you have
read and understood this manual.
The most important thing is to know how to start and stop this machine safely, especially in an
emergency. Keep the work area neat and clean. Trying to eliminate clutter around the machine
during use will reduce its concentration. Any liquid spilled on the oor could cause it to slip.
Find a suitable place. If the machine is bench mount, the location should provide good natural
light or arti cial lighting as a replacement. Avoid locations with moisture and dust, as you will
have
a negative e ect on the performance of the machine. If the machine is portable, do not expose
the tool to rain. In all cases, do not operate power tools near ammable materials.
1
Publicidad
