Publicidad
Idiomas disponibles
Idiomas disponibles
3 YEARS
L I M I T E D WA R R A N T Y
Position 2 applies an average amount of pendulum action.
Position 3 has the most aggressive action, with a faster cut, but with a rougher nish.
7.4 LED WORK LIGHT - FIG. 6
This machine has an LED work light (5), which is useful in low level light conditions.
- The LED work light works in conjunction with the ON / OFF switch. FIG. 6
7.5 GENERAL CUT
Important: Always wear safety glasses.
Important: Due to the body shape, this machine can be operated with one hand, but for safety
reasons, it is highly recommended to keep both hands on the machine during use.
Note: applying pressure to the blade can overload the motor and cause damage.
During cutting operations, make sure that the base is always resting on the workpiece
- When cutting metals, it is advisable to spread a few drops of oil on the cutting line to help keep
the blade cool and extend blade life.
- The sheets must always be supported on stable supports (chipboard or plywood). In this way,
drag is avoided and the elasticity of the material is compensated.
- Small workpieces must be held rmly so that they remain in position during work operations
(for example: clamping in place with a clamp).
10
Publicidad
