Husqvarna 540XP Mark III Manual De Usuario página 235

the air filter. AirInjection
and the engine.
To clean the cooling system
The cooling system keeps the engine temperature
down. The cooling system includes the air intake on the
starter (A), the pawls on the flywheel (B), the cooling
fins on the cylinder (C), the cooling channel (D) and the
cylinder cover (E).
A
B
C
The engine does not start
Product part to examine
Starter pawls
1679 - 006 -
™
extends the life of the air filter
E
D
Troubleshooting
Possible cause
The starter pawls are blocked.
1. Clean the cooling system with a brush weekly or
more frequently if it is necessary.
2. Make sure that the cooling system is not dirty or
blocked.
CAUTION:
cooling system can make the product
too hot, which can cause damage to the
product.
Action
Adjust or replace the starter pawls.
Clean around the pawls.
Speak to an approved service work-
shop.
A dirty or blocked
235