Publicidad
Idiomas disponibles
Idiomas disponibles
English
even if it is damaged or completely discharged. Do not
leave the battery near a heat source. The battery can
explode with heat or fire, causing serious personal and
material damage.
This battery is sealed and should never leave liquid
inside. If the seal breaks down and the liquid touches
your skin quickly wash with plenty of soap and water,
neutralize the liquid with a weak acid such as lemon
or vinegar and go to your medical center urgently. If
battery fluid touches your eyes, rinse thoroughly with
water for 10 minutes and seek immediate medical
attention. If the seal is damaged, do not inhale the
vapors produced by the battery, as they may irritate
you. In case of accidental inhalation, breathe fresh air
and seek urgent medical attention.
Always disconnect the battery from the machine
before doing any work. Only handle this machine
when it is disconnected.
2.5. USE AND CARE OF THE MACHINE
Use this machine, accessories, supplies, etc. in
accordance with these instructions and in the manner
intended, taking into account the working conditions
and the work to be carried out. The use of this
machine for applications other than those foreseen
may cause a dangerous situation.
Check that all security elements are installed and in
good condition.
Remember that the operator of the machine is
responsible for the dangers and accidents caused to
other people or things. The manufacturer will not be
responsible for any damages caused by improper or
incorrect use of this machine.
Keep your body away from the cutting tool when using
the machine.
Do not force this machine. Use this machine for the
correct application. The use of the correct machine
for the type of work to be done will allow you to work
better and safer.
Do not use this machine if the switch does not change
between "closed" and "open". Any machine that can
not be controlled with the switch is dangerous and
must be repaired.
Keep this machine. Check that moving parts are not
misaligned or locked, that there are no broken parts or
other conditions that may affect the operation of this
machine.
Never use metal threads or other materials instead of
nylon thread.
If the cutting tool collides with any foreign element
while it is running, disconnect the machine from the
mains and examine the machine before continuing. If
you detect any sign of damage, take your machine to
the technical service.
Keep cutting instruments sharp and clean. Cutting
instruments properly maintained with sharp cutting
edges are less likely to lock and easier to control.
If the machine starts to vibrate in a strange way turn
it off and examine it to find the cause. If it does not
detect the reason, take your machine to the technical
service. The vibrations are always a sign of a problem
in the machine.
Keep the handles of this machine dry and clean.
Greasy or oiled handles are sliding and cause loss of
control over the machine.
Turn off and unplug the machine, and make sure
that the cutting tool is stopped before making
any adjustments, changing accessories, cleaning,
transporting or storing this machine. Such preventive
26/104
Publicidad
