Publicidad
Idiomas disponibles
Idiomas disponibles
6.3.3. TELESCOPIC REGULATION AND 90º TURN
Sense for
unlock
Direction of rotation
to unlock
1. Loosen the collar by turning in the direction marked
by the unlocking arrow.
2. Enlarge or shorten the pole to the desired length.
3. Tighten the collar by turning in the direction
marked by the lock arrow.
4. Pull the tab up without releasing it, turn the pole
90º to the left or right.
5. Release the tab
Be sure you have tightened the collar tightly before
starting the machine.
6.3.5. CONTROL OF THE WORKING ANGLE
Press the button and adjust to the
desired angle.
6.3.6. TURNING ON AND OFF
On/off button
Turning on the machine:
Install the battery
Direction of rotation
Press the on / off button, (if everything is correct, the
to block
green light will remain steady, if there is any problem
the green light will flash) then press the security
button and, without releasing it, press the accelerator
trigger.
Disconnection of the machine:
Release the accelerator trigger, press the on / off
button, if you are not going to use it for a long time
remove the battery.
will continue rotating for a moment due to inertia.
Wait until the cutting tool stops before carrying out
maintenance on the machine or transporting it.
33/104
Accelerator trigger
After turning off the machine, the cutting tool
English
Security button
Publicidad
