Publicidad
Idiomas disponibles
Idiomas disponibles
15.4.3
Temperature Mode
• Press the Function Key 3. to select the temperature. The preset temperature stage
"120°C" is selected and the device turns on.
• With the + / - keys, you can change the settings at any time in a range from 60 –
240°C. (Temperature stages: 60, 70, 80, 90, 100, 120, 140, 160, 180, 200, 220 and
240°C).
• Please note that the two functions of level and temperature can be chosen as
alternative . You can either work with the power levels or with the temperature
stages. The most recently selected function is active.
• The temperature is measured by a sensor below the glass ceramic plate, therefore
the displayed temperature can deviate from the temperature in the pot.
Please note (W3500, S-Line 3500)
► In case of grilling or cooking deep fry food we would advise you to use the function
"Temperature" as in this case you can use temperatures up to 240°C. Otherwise the
overheating protection "E05" will be activated.
► When one hotplate works with 180-240°C then the other hotplate cannot work with
more than 160°C.
► When one hotplate works with 180-240°C then the other hotplate cannot work with
more than level 10.
15.4.4
Powersharing Mode (W3500, S-Line 3500)
• If both induction fields are operated, the boards will share over power sharing
function levels as follows:
left
12
11
right
10
11
Powersharing Maitre 3500
When you select power mode Left/Right then the boards will share function levels as follows
L/R
12
11
R/L
5
7
R/L
80°
100°
When you select temperature mode Left/Right then the boards will share function levels as follows
L/R 60°
70°
80°
R/L 240° 240° 240° 160° 160° 160°
R/L 12
12
12
10
9
8
7
6
12
12
12
12
12
10
9
8
8
9
10
100°
160°
160° 160° 160° 240° 240° 240° 240° 240°
90°
100° 120°
11
11
9
5
4
3
2
1
12
12
12
12
12
7
6
5
11
11
12
140° 160° 180° 200° 220° 240°
160° 160° 80°
80°
9
9
5
5
4
3
2
1
12
12
12
12
80°
80°
5
5
46
Publicidad
