LINDR SODA PYGMY Green Line new Instrucciones De Uso página 19

6. ELECTRICAL CONNECTION:
Connect the device to a power socket in ac-
cordance with specifications on the machine
plate of the device. Electrical wiring is subject
to local regulations. If the power leads (ca-
bles) are damaged, they must be replaced by
the manufacturer, their service technician or
a similarly qualified person to prevent risk of
hazardous situations.
DANGER: Do not use or turn on the device
if the power lead cable is damaged!
7. TESTING:
The product is delivered ready for immediate
use.
8. WARRANTY:
The device comes with a warranty in accord-
ance with general legal regulations of the
Czech Republic or in accordance with the
trade agreement. During the validity period
of the warranty, we will remove any defects on
the product free of charge, provided these de-
fects were not caused by excess wear, improp-
er handling, incorrect storage or by using the
product in a way that is counter to the instruc-
tion manual or the product's design as defined
9. CONNECTION AND PRESSURISATION
9.1 Connection and Pressurisation
1. Water inlet 3/8
2. Inlet of CO
2
3. Pressure reducer CO
4. CO bottle
2
9.2 Connection and Pressurisation
1. Pressure reducer CO
2. CO bottle
2
3. Main water connection (drinking water)
4. Aqua Stop (recommended)
5. Water Filter
9.3 Connection and Pressurisation
1. Main water connection (drinking water)
2. Aqua Stop (recommended)
3. Water Filter
(see Fig. 9.)
SODA PYGMY Green Line new
2
SODA PYGMY 25 Green Line new
6. Water outlet - carbonated water
2
7. Water outlet - cooled water
8. Water inlet
9. Inlet of CO
10. Speed fitting 9,5 x 8 mm
SODA Exclusive Green Line new
by the manufacturer. Materials replaced dur-
ing the validity period of the warranty are our
property. The legitimacy of the warranty claim
is always decided by an authorised service
centre. Warranty provided by a retailer outside
of the territory of the Czech Republic is gov-
erned by the agreement between the retail-
er and the buyer in their mutual relationship;
this agreement is not directly linked to the
manufacturer. The agreement does not give
the buyer the right to submit warranty claims
to the manufacturer. Transport expenses or
other costs are not covered by the warranty.
ATTENTION:
Electrical devices and appliances must be
checked/inspected at a time stipulated by
valid legislation of the country the device
is operated in. Inspection of wiring may
only be done by a person with valid au-
thorisation for this activity. Service work,
provision of spare parts and inspection is
done by the manufacturer or an author-
ised service centre.
:
5. Pressure reducer for water
6. Water Filter
7. Aqua Stop (recommended)
8. Main water connection (drinking water)
2
4. Pressure reducer CO
5. CO bottle
2
6. Water inlet
2
EN
19