LINDR SODA PYGMY Green Line new Instrucciones De Uso página 20

9.4 Connection and Pressurisation
1. Main water connection (drinking water)
2. Aqua Stop (recommended)
3. Water Filter
9.5 Connection and Pressurisation
1. Main water connection (drinking water)
2. Aqua Stop (recommended)
3. Pressure reducer for water
4. Water Filter
5. Pressure reducer CO
9.6 Connection and Pressurisation
1. Main water connection (drinking water)
2. Aqua Stop (recommended)
3. Water Filter
4. Pressure reducer for water
5. Water intlet - cooled water
9.7 Connection and Pressurisation
1. Pressure reducer for 2 st. CO
2. CO bottle
20 2
3. Beverage
4. Y 8 x 8 x 8 mm speed fitting
5. Keg coupler (A, S, M-system)
6. Water Filter
7. Aqua Stop (recommended)
8. Main water connection (drinking water)
9. Pressure reducer for water
WARNING: Check the level and cleanliness of the water bath in the plastic container
(SODA AS-45 Green Line new a SODA AS-110 Green Line new) (after six months of operation
we recommend to replace the water bath).
9.8 Connection and Pressurisation
1. Main water connection (drinking water)
2. Aqua Stop (recommended)
3. Water Filter
4. Pressure reducer for water
5. Pressure reducer CO
6. CO bottle
2
CW COMPACT Green Line new
SODA AS-45 Green Line new
Variant A:
SODA WATER / COLD WATER
2
SODA AS-45 Green Line new
Variant B:
SODA WATER / BEVERAGE
SODA AS-110 Green Line new
2
External soda water maker new
2
Max. inlet water temperature 2 °C - 5 °C.
4. Water inlet (min. 3 bar, max. 8 bar)
5. CO bottle
2
6. CO bottle
2
7. Y 8 x 8 x 8 mm speed fitting
8. Inlet of CO
2
9. Water intlet - cooled water
10. Water intlet - carbonated water
6. Water intlet - carbonated water
7. Inlet of CO
2
8. Pressure reducer for 2 st. CO
6. CO bottle
2
7. Beverage
10. Water outlet - carbonated water
11. Beverage 1, 2 - outlet
12. Cooling ( IN / OUT)
13. Water inlet for chilling
14. Water inlet
15. Inlet of CO
2
16. Speed fitting 9,5 x 8 mm (3x)
17. Speed fitting 9,5 x 8 mm (2x)
7. Cooler
8. Outlet SODA
9. Switch On/ Off
10. Inlet of CO
2
11. Water inlet
2