Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 35 Wednesday, February 15, 2023 10:43 AM
Pan Sensing
The cooking-element sensors located below the
cooktop surface require certain cookware
conditions to be met before the induction cooking
elements can operate.
The cooking zone LED bar may display a pan
sensing error message. If a cooking element is
activated and no cookware is detected, the
affected induction cooking zone LED bar will
Minimum and Maximum Pan Size
There are four cooking elements on the induction cooktop. Each element requires a appropriate pan size
to be used effectively. The bottom size of the pan must be between the maximum and minimum diameter
for proper cooking to occur.
A
Cooking Area
Type
Induction
a
Induction
b
Induction
c
Induction
d
Warm
e
Incorrect Use
• Pan bottom rests on cooktop trim or does not rest
completely on the cooktop surface.
• Pan is unbalanced by heavy handle.
fluctuate. If the cookware does not meet the
correct conditions, the cooking zone may not heat.
If the problem is not corrected, the affected
cooking element will automatically deactivate after
one minute.
Heater
Size (inch)
8
11
6
6
6
Diameter of Pan Bottom
Min.
7.5 inch (190 mm)
9.2 inch (224 mm)
9.5 inch (241 mm)
11.8 inch (300 mm)
5.5 inch (140 mm)
7.0 inch (178 mm)
5.5 inch (140 mm)
7.0 inch (178 mm)
-
OPERATION
35
A
Max.
-
Publicidad
