Motorola Solutions CLR Serie Manual Del Usuario página 27

Indication
Steady red
Steady green
Fast blinking red
Slowly blinking amber
Blink red one time
Blink amber two times
Blink green three times
3.10
Troubleshooting LED
If there is no LED indication, perform the following tasks:
Procedure:
1 Check if the radio with battery, or the battery alone, is inserted correctly.
2 Ensure the power supply cable is securely plugged into the charger socket using an appropriate
AC outlet and there is power to the outlet.
3 Confirm that the battery being used with the radio is listed in the
Batteries on page
3.11
Checking Battery Status
Procedure:
1 Short press the Power button to check the battery status.
Table 9: Battery Status
Battery Status
Battery high
Battery medium
Battery low
Battery critical
Battery shut-down
NOTICE: Battery saver is enabled by default.
4
Re-position the battery pack to fix the error.
5
Battery temperature is too warm or too cold or wrong power voltage is used.
6
The device LED indicator will be flashing red at the same time.
23.
Battery Level
50 –100%
20 – 50%
3 – 20%
0 – 3%
0%
Chapter 3: Battery and Charger
Status
Charging
Charged
4
Error
5
Standby
Battery level is low
Battery level is medium
Battery level is high
Motorola Solutions Authorized
Voice Prompt
"Battery Level High"
"Battery Level Medium"
"Battery Level Low"
"Battery Level Critical"
Shutdown beeps
MN007428A01-AB
6
27