Honda EU70is Manual Del Propietário página 30

i-Monitor
The i-Monitor is a user interface that allows the operator to view (when the
generator is running) total operating time in hours, generator output, engine
RPM, battery voltage, and error messages. The different display modes are
selected by pressing the i-Monitor button.
i-Monitor at Startup
During start up, the i-Monitor display and all three indicators will
simultaneously blink once. The condition of the i-Monitor display and all three
indicators can be checked. Once the generator is running, the green OUTPUT
indicator and the i-Monitor display will remain lit.
Display Backlight Flashes
If the key is left in the ON position for over 30 seconds without starting the
engine, the display will start to flash.
i-Monitor Display
The i-Monitor display is divided into two screens. The single-digit screen displays
the i-Monitor mode, which is represented by a number 1 through 4. The four-digit
screen displays the four mode values or any activated error messages.
i-Monitor Display Mode 1 – Total Operating Hours
This mode displays the total operating hours of the generator. When the
generator is running, the total operating time accumulates. If the total operating
time is less than one hour, the numeric display will be ''0.'' When the operating
time is one hour or greater, the display will be ''1'' or ''2'' and so on. Base the
generator's maintenance schedule on the accumulated time displayed.
CONTROLS & FEATURES
SINGLE-DIGIT
SCREEN DISPLAY
FOUR-DIGIT SCREEN
DISPLAY
i-MONITOR BUTTON
27