Honda EU70is Manual Del Propietário página 87

OPTIONAL PARTS
HANGER KIT
Protect the fuel tank and frame pipe with the protector films during installation
of the hanger.
1. Slide one end of the hanger under the frame pipe on the left side of the
generator.
2. Slide the other end of the hanger under the frame pipe on the right side of
the generator.
3. Slide the hanger along the frame pipes to align the center of the hanger with
the recessed part on the rear side of the fuel tank.
4. Install the hanger brackets on both ends of the hanger and tighten the 8×16
mm flange bolts securely.
TORQUE: 24–29 N·m (2.4–3.0 kgf·m)
84
HANGER
HANGER
PROTECTOR FILM
(commercially available)
8×16 mm FLANGE BOLT (4)
HANGER
BRACKET (2)