Honda EU70is Manual Del Propietário página 61

SERVICING YOUR GENERATOR
SPARK ARRESTER SERVICE
If the engine has been running, the muffler will be very hot. Allow the muffler to
cool before servicing the spark arrester.
1. Remove the two 5×16 mm pan head screws, and remove the tail pipe and
spark arrester.
SPARK ARRESTER
TAIL PIPE
5×16 mm PAN HEAD SCREW (2)
2. Use a brush to remove carbon deposits from the spark arrester screen.
Be careful to avoid damaging the screen.
The spark arrester must be free of breaks and tears. Replace the spark arrester
if it is damaged.
3. Install the spark arrester in the reverse order of removal.
58