Publicidad
Idiomas disponibles
Idiomas disponibles
5.1 CONSOLE FUNCTIONS
5.1.1 WHITE BALANCE
To obtain the white balance, focus on a completely bright and white image lit with the maximum
intensity and press the White Balance button for approximately 3 seconds. Release the
button and continue focusing on the white image till the icon of the padlock on the screen
get closed (approximately 2 seconds). This set up will be stored in the memory even if
the camera is off.
While the White Balance function is being performed, the icon of the padlock on the screen will
indicate that the function is activated.
If the white balance is well adjusted, this guarantees the reproduction of natural colors.
Perform a new white balance every time the light source is changed.
Perform the White Balance with the same light source that you will use in the intervention.
5.2 CAMERA FUNCTIONS
5.2.1 ZOOM FUNCTION
The system has 10 levels of zoom (from 0 to 9):
5.2.2 BRIGHTNESS FUNCTION
This function sets different levels of brightness in the image, from 0 to 20. By pressing the
corresponding button in the camera handheld you can select the brightness level most suitable to
achieve an optimal image on the screen.
INMANUUML023 USER M./M.USO PROCAM HD BASIC V.2022.10 ENG/ESP US
X9
X0
. . .
X2
X3
20
0
19
1
. . .
USER MANUAL – PROCAM HD II
Página 9 de 30
Publicidad
