Publicidad
Idiomas disponibles
Idiomas disponibles
3.4.1.2 FRONT PANEL
1.
Videocamera connector
2.
WHITE BALANCE function
3.
ON/OFF button
3.4.2 PROCAM CAMERA
The connection and revision of the equipment must be carried out by technical personnel
with knowledge of the electrical installation from where the equipment will be powered.
1.
Carefully unpack the equipment.
2.
Place the PROCAM HD console on a solid surface.
3.
If the building structure has equipotential grounding, connect the equipment to ground
through the equipotential ground terminal located on the rear panel of the unit.
4.
Connect the connector of the video camera ECLERIS to the connector in the front panel.
5.
Plug the video output connector on the rear panel of the PROCAM HD console to the video
input of the video monitor using an HDMI cable.
Note: PROCAM HD supports all the video outputs to multiple devices simultaneously.
INMANUUML023 USER M./M.USO PROCAM HD BASIC V.2022.10 ENG/ESP US
1
2
4. INSTALLATION
USER MANUAL – PROCAM HD II
1.
Zoom Button
2.
Brightness Button
Page 7 of 30
Publicidad
