Technical Data; General Safety Regulations - Fimap FSM Manual De Uso

TECHNICAL DATA............................................................................................................8

SYMBOLS USED IN THE MANUAL ................................................................................8
PURPOSE AND CONTENT OF THE MANUAL ...............................................................8
TARGET GROUP ..............................................................................................................8
STORING THE USE AND MAINTENANCE MANUAL .....................................................8
ON DELIVERY OF THE APPLIANCE ..............................................................................8
INTRODUCTORY COMMENT ..........................................................................................8
IDENTIFICATION DATA ....................................................................................................8
TECHNICAL DESCRIPTION ............................................................................................8
INTENDED USE ................................................................................................................8
SAFETY ............................................................................................................................8

GENERAL SAFETY REGULATIONS ...............................................................................8

HANDLING THE PACKED APPLIANCE ........................................................................10
HOW TO UNPACK THE APPLIANCE ............................................................................10
PREPARING THE APPLIANCE ......................................................................................10
WORK .............................................................................................................................10
AT THE END OF THE WORK .........................................................................................10
MAINTENANCE ..............................................................................................................11
TROUBLESHOOTING ....................................................................................................11
DISPOSAL ......................................................................................................................11
TECHNICAL DATA
working width (including side brushes)
working width (excluding side brushes)
working capacity up to
debris hopper capacity
machine length (without / with side brushes)
machine width (without / with side brushes)
machine height (without / with handlebars)
weight
The descriptions contained in this document are not binding. The company therefore reserves the right to
make any modifications at any time to elements, details, or accessory supply, as considered necessary
for reasons of improvement or manufacturing/commercial requirements. The reproduction, even partial,
of the text and drawings contained in this document is prohibited by law.
The company reserves the right to make any technical and/or supply modifications. The images
are shown as reference only and are not binding as to the actual design and/or equipment.
SYMBOLS USED IN THE MANUAL
Symbol of the open book with i:
Indicates the need to consult the instruction manual.
Symbol of the open book:
Tells the operator to read the user manual before using the device.
Covered place symbol:
The operations preceded by this symbol must always be carried out in a dry, covered
area.
Warning symbol:
Carefully read the sections preceded by this symbol meticulously following the
instructions indicated for the safety of the operator and the device.
Protective gloves symbol:
Always wear protective gloves, to avoid the risk of serious injury to your hands.
Tool symbol:
Indicates the need to use tools not included in the supply.
Disposal symbol:
Carefully read the sections marked with this symbol for disposing of the appliance.
Recycling symbol:
Tells the operator to carry out the operations in compliance with environmental
regulations in force in the place where the appliance is being used.
PURPOSE AND CONTENT OF THE MANUAL
The aim of this manual is to provide customers with all the information needed to use the machine
in the safest, most appropriate and most autonomous way. This includes information concerning
technical aspects, safety, operation, downtime, maintenance, spare parts and scrapping. The operators
and qualified technicians must carefully read the instructions in this manual before carrying out any
operations on the machine. If in doubt about the correct interpretation of instructions, contact your
nearest Customer Service Centre to obtain the necessary clarifications.
10076791-AA_UM_FSM-ID.indb 8
CONTENTS
U/M FSM
mm
mm
m /h
2
L
mm 800 / 1000
mm 725 / 785
mm 400 / 1020
kg
This manual is written both for operators and for qualified machine maintenance technicians. Operators
must not perform operations that should be carried out by qualified technicians. FIMAP SpA cannot be
held liable for damages resulting from failure to comply with this prohibition.
STORING THE USE AND MAINTENANCE MANUAL
The Use and Maintenance Manual must be stored in its special pouch close to the machine, protected
from liquids and anything else that could compromise its legibility.
ON DELIVERY OF THE APPLIANCE
When the machine is consigned to the customer, an immediate check must be performed to ensure all
the material mentioned in the shipping documents has been received, and also to check the machine
has not suffered damage during transportation. If this is the case, the carrier must ascertain the extent
of the damage at once, informing our customer service office. It is only by prompt action of this type that
the missing material can be obtained, and compensation for damage successfully claimed.
INTRODUCTORY COMMENT
Any machine can only work properly and effectively if used correctly and kept in full working order by
carrying out the maintenance operations described in the attached documentation. You should therefore
read this instruction manual carefully, consulting it again if issues arise while using the machine. If
necessary, remember that our assistance service (organised in collaboration with our dealers) is always
available for advice or direct intervention.
For technical assistance or to request replacement parts, always give the model, the version and the
serial number (written on the relevant plate).
TECHNICAL DESCRIPTION
The FSM is a manual sweeping machine for cleaning indoor and outdoor surfaces that need to be
dry. The appliance has: a central brush for collecting the swept up dirt, one side brush for cleaning in
corners, and a debris hopper for holding the dirt. Do not use the appliance for purposes other than
the one indicated above.
This sweeping machine was designed and built to be used by a qualified operator to clean smooth,
compact flooring in the commercial, residential and industrial sectors, in proven safety conditions.
650
The machine is suitable for being used only in closed, or covered, environments. The machine is not
meant to be used in the rain or under jets of water. The appliance is not suited for use on surfaces like
460
carpet floors.
2600
WARNING: it is forbidden to use the machine for picking up dangerous powders or inflammable
liquids in places with an explosive atmosphere.
40
ATTENTION: The machine is not suitable for use in the rain, or under water jets.
Operator cooperation is paramount for accident prevention. No accident prevention programme can
be effective without the full cooperation of the person directly responsible for machine operation. The
majority of occupational accidents that happen either in the workplace or whilst moving are caused by
26
failure to respect the most basic safety rules. An attentive, careful operator is most effective guarantee
against accidents and is fundamental in order to implement any prevention programme.
GENERAL SAFETY REGULATIONS
The regulations below must be carefully
followed in order to avoid harm to the operator
and damage to the machine.
WARNING:
• This machine must not be used by
people (including children) with reduced
physical, sensorial and mental capabilities,
or by people without any experience
or knowledge, unless they have been
controlled and instructed in the use of the
machine by those responsible for their
safety. Children must be supervised to
ensure they do not play with the machine.
• The machine must only be used by
authorised personnel trained in its use.
• The machine is not suitable for cleaning
rough or uneven floors. Do not use the
machine on slopes.
8
ENGLISH
TARGET GROUP
IDENTIFICATION DATA
INTENDED USE
SAFETY
21/02/2018 08:54:00