Descargar Imprimir esta página

Puky KINDER-STRASSENFAHRRAD Manual De Instrucciones página 24

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 98
SETTING THE TENSION
MOUNTING THE REFLECTORS ON THE
HANDLEBARS AND SEAT POST
Please make sure that the reflector (white) for the handlebar is always facing in the direction of travel and
the reflector (red) for the seat post is facing to the rear, against the direction of travel.
You will need the following tools to mount the reflectors (not included in the scope of delivery)
• Crosstip screwdriver or screwdriver T20 (TORX)
24
Carry out fine adjustments of the gear positions by
turning the tension setting screw. Rotating anti-
clockwise eases switching to the next largest gear.
Rotating clockwise eases switching to the next
smallest gear.
You should only carry out setting of the chain gears if
1. When mounting the reflectors on the handlebars,
the bracket must be loosely fitted over the handle-
bars. Align the bracket and screw the front reflector
(white) to the bracket.
A
Setting screw for tension
1
you are capable of doing so.
If in doubt, have this carried out by a specialist.
2
2. When mounting on the saddle post, the bracket
must be loosely fitted over the saddle post (including
rubber ring). Align the bracket and screw the rear
reflector (red) to the bracket.
GB

Publicidad

loading