Keysight Technologies EDU33210 Serie Guia Del Usuario página 123

Front Panel Operations
Press [Sweep] > Sweep Time . Use the numeric keypad or the knob and arrows to set a desired value. If you use the
keypad, select a prefix unit to finish.
SCPI Command
[SOURce[1|2]:]SWEep:TIME {<seconds>|MINimum|MAXimum|DEFault}
Hold/Return Time
Hold time specifies time (in seconds) to remain at the stop frequency, and return time specifies the number of
seconds to return from the stop frequency to the start frequency.
Hold time and return time: 0 to 3600 seconds (default 0).
Front Panel Operations
Press [Sweep] > Hold Return > Hold Time or Return Time . Use the numeric keypad or the knob and arrows to set a
desired value. If you use the keypad, select a prefix unit to finish.
Keysight EDU33210 Series User's Guide 123