1. Select the function and amplitude for the sweep.
For sweeps, you can select sine, square, ramp, pulse, triangle, PRBS waveforms, or arbitrary waveforms (noise and
DC are not allowed). For this example, select a sine wave with an amplitude of 5 Vpp.
2. Select the sweep mode.
Press [Sweep] and verify that the
softkey to turn sweep
The button is also illuminated.
Keysight EDU33210 Series User's Guide
Linear
sweep mode is currently selected on the second softkey. Press the Sweep
ON
. Notice the Linear Sweep status message at the top of the tab for the current channel.
59