Publicidad
Idiomas disponibles
Idiomas disponibles
Amplitude Coupling
Amplitude coupling, enabled by the Ampl Cpl
the channels so that changing the amplitude or offset on one channel affects both channels.
Tracking
Tracking, configured by the Tracking softkey, has three modes: OFF , Identical , and Inverted .
OFF
– When tracking is
Identical
– When tracking is
Inverted
– The third mode,
using both outputs.
Combine
The Combine feature combines two outputs into one connector. If you choose
are combined on channel 1; choosing
In the image below, the top waveform is a 100 mVpp, 1 kHz sine wave on channel 1, and the bottom wave f orm is a
100 mVpp, 5 kHz sine wave on channel 2.
146
ON
, the two channels operate independently.
, they behave as one channel.
, makes the channels' outputs inverses of each other, resulting in a differential channel
CH1
from the Channel 2 menu combines them on chan n el 2.
| OFF softkey, couples the amplitude and offset voltage between
CH2
from the Channel 1 menu, they
Keysight EDU33210 Series User's Guide
Publicidad
