Publicidad
Idiomas disponibles
Idiomas disponibles
PowerBoost function
The PowerBoost function enables you to heat up large
quantities of water more quickly than with power level 9.
This function is available for all cooking zones, provided
the other cooking zone in the same group is not in use.
If it is, the illuminated ring will flash three times and
three signals will sound. Then power level 9 will be set
automatically without activating the function. Turn the
control knob to position 0.
Note: The PowerBoost function can also be activated in
the flexible area if the cooking zone is being used as a
single hotplate.
Activating
Push in the control knob and turn it to position
signal will sound; the illuminated ring around the control
knob will go out and then turn orange.
The function has now been activated.
Deactivating
Turn the control knob to the power level you require. A
signal will sound; the illuminated ring around the control
knob will go out and then turn orange.
The function has now been deactivated.
Note: In certain circumstances, the PowerBoost
function may switch itself off automatically in order to
protect the electronic elements inside the hob.
In this case, power level 9 will be set automatically, the
illuminated ring will flash three times and three signals
will sound.
Turn the control knob to position 0 or a power level of
your choice.
Frying sensor
This function maintains the appropriate temperature in
the frying pan when you are frying food.
Advantages when frying
▯
The hotplate only heats up if this is required to
maintain the temperature. This saves energy and
prevents the oil or fat from overheating.
▯
The frying function reports when the empty frying
pan has reached the optimum temperature for
adding oil and then for adding the food.
Notes
–
Do not place a lid on the pan. Otherwise, the
function does not activate correctly. You can use a
splash guard to prevent splashes of grease.
–
Use suitable oil or fat for frying. If butter, margarine,
extra virgin olive oil or lard is used, set heat setting
1 or 2.
–
Never leave a frying pan, with or without food,
unattended when it is being heated.
–
If the hotplate is a higher temperature than the
cookware or vice versa, the frying sensor will not be
Ž
. A
activated correctly.
Frying pans for the frying sensor
Frying pans specifically suited to use with the frying
sensor are available. This optional accessory can be
purchased separately from specialist retailers or
through our technical after-sales service. Always quote
the relevant reference number.
▯
GP900001 15 cm frying pan.
▯
GP900002 19 cm frying pan.
▯
GP900003 21 cm frying pan.
These frying pans have a non-stick coating so that you
require only a small amount of oil to fry food.
Notes
–
The frying sensor has been configured specifically
for this type of frying pan.
–
Ensure that the diameter of the base of the frying
pan corresponds to the size of the hotplate. Place
the frying pan in the centre of the hotplate.
–
The frying sensor may not activate on the Flex
cooking zone if the frying pan does not match the
size of the hotplate or if it is positioned incorrectly.
See the section entitled ~
–
Other types of frying pan may overheat. They may
reach a temperature above or below the selected
temperature setting. Select the lowest temperature
setting to begin with and change it if necessary.
Getting to know your appliance
"Flexible cooking zone"
en
13
Publicidad
