Breville the Bambino BES450BSS Manual De Instrucciones página 10

Functions
FIRST USE
1. Remove the water tank and fill it with
potable water to the indicated MAX line.
Place the water tank back firmly onto
the machine.
2. Ensure that the drip tray is firmly placed on
the machine.
3. Place a 17 fl. oz (500ml) container under
the portafilter and steam wand for the water
drips for this first cycle.
4. Plug the power cord in the power outlet, and
the 1 Cup button illuminates.
5. Press the 1 Cup button to begin the first
use cycle.
NOTE
The first use cycle is to rinse the machine and
prime the heating system.
STANDBY MODE
To turn off the operation and enter standby
mode, press the 1 Cup and Hot Water buttons
for 0.5 second simultaneously.
+
NOTE
Unit will enter 'standby mode' when idle or no
interaction from user after 10 minutes.
10
FILLLING THE WATER TANK
Lift the water tank from the machine.
Remove the water tank lid and add potable
water to the water tank, filling to the MAX
marking indicated.
Replace the water tank onto the machine, press
down ensuring it is properly attached and
sitting flush against the back of the machine.
NOTE
Machine LED lights will flash 6 times for
3 seconds when no water is detected in
the water tank.
FILTER BASKETS
Single Wall Filter Baskets
Use Single Wall filter baskets if grinding fresh
whole coffee beans.
Single Wall filter baskets allow you to
experiment with grind, dose and tamp to create
a more balanced espresso.
1 CUP
Dual Wall Filter Baskets
Use Dual Wall filter baskets if using pre-
ground coffee.
Dual Wall filter baskets regulate the pressure
0.5s
and help to optimize the extraction regardless
of the grind, dose, tamp pressure or freshness.
1 CUP
1 CUP
2 CUP
2 CUP
2 CUP