Define The Area To Be Vacuumed; Use; Switching On And Off; Starting Vacuuming - Miele HS17 Instrucciones De Manejo

en
 Press the OK button to confirm your
selection.
The minutes indicator will flash in the
clock display on the robot vacuum
cleaner.
 Press the + or - direction button to
set the current minutes.
 Press the OK button to confirm your
selection.
If you want to alter the time of day, pro‐
ceed as described above.

Define the area to be vacuumed

(dia. 13)
The robot vacuum cleaner is 88 mm
high. Any items which are to be vac‐
uumed under should have a mini‐
mum clearance of 90 mm.
You can define any areas which the ro‐
bot vacuum cleaner should not have
access to.
 Place the magnetic strip supplied
with the groove facing downwards on
the floor.
The robot vacuum cleaner will not cross
over the magnetic strip.
Adhesive strips are supplied for perma‐
nent fixing.
Additional magnetic strips are available
to order from Miele or online at
www.miele-shop.com.
44

Use

Always watch the robot vacuum
cleaner when it is vacuuming new
surroundings for the first time. This
way you will be able to detect and
remove any problematic obstacles or
define the area they are in with the
magnetic strip.

Switching on and off

 Press the Power button on the remo‐
te control.
The display will be activated.

Starting vacuuming

There are two ways to start vacuuming
in the Auto standard vacuuming mode.
Option 1 (Remote control)
 Press the   button.
Option 2 (Display)
 Press the   sensor in the display.
The area to be vacuumed will be
cleaned.