Sony LBT-SH2000 Manual De Instrucciones página 24

Changing the display
Changing the display mode
Press DISPLAY on the remote
control repeatedly while the
system is turned off.
Demonstration
The display changes and the indicator
flashes even when the system is turned
off.
No display (Power Saving Mode)
The display is turned off to conserve
power. The timer and clock continue to
operate. You cannot turn on the system by
pressing the function buttons.
Clock
The clock display automatically turns to
Power Saving Mode after a few seconds.
Changing the spectrum
pattern of the display panel
1
Press OPTIONS.
2
Press
"SPECTRUM", then press
ENTER.
3
Press
the spectrum pattern you want,
then press ENTER.
To exit the OPTIONS menu, press
OPTIONS.
US
24
/ repeatedly to select
/ repeatedly to select
Changing the illumination
pattern around VOLUME/
DJ CONTROL knob
1
Press OPTIONS.
2
Press / repeatedly to select
"ILLUM", then press ENTER.
3
Press / repeatedly to select
the illumination pattern you
want, then press ENTER.
To exit the OPTIONS menu, press
OPTIONS.
Changing the brightness of the
display panel
1
Press OPTIONS.
2
Press / repeatedly to select
"DIMMER", then press ENTER.
3
Press / repeatedly to select
the brightness setting you want,
then press ENTER.
To exit the OPTIONS menu, press
OPTIONS.
Viewing information in the
display panel
Press DISPLAY on the remote
control repeatedly when the
system is turned on.
You can view the information as follows:
• For AUDIO CD:
– The elapsed playing time, remaining
playing time and total remaining
playing time during playback.
– The total playing time when playback
is stopped.
• For audio files:
– The elapsed playing time, file name
and folder name.
– The title, artist and album information.