Fanimation The Camview FPS6225BL Instrucciones De Montaje página 7

WARNING
The fan must be hung with at least 7´ of clearance from
floor to blades. (Figure 1)
WARNING
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before hanging.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
WARNING
It is critical that the outlet box and the screws are
securely anchored to the building structure and capable
of withstanding a load of at least 35 lbs. Failure to verify
that the screws are properly installed could result in the
fan falling. (Figure 2)
1. Securely attach the ceiling junction box acceptable for
ceiling support into the building structure. Junction box
is not supplied with the fan. (Figure 2)
2. Using the ceiling junction box screws provided with the
ceiling junction box, securely attach the ceiling bracket to
the ceiling junction box as shown. (Figure 3)
3. Hook the motor assembly onto the ceiling bracket
assembly as shown. (Figure 4)
You can now proceed with the electrical wiring of your fan.
How to Hang Your Ceiling Fan
7
Ceiling
Floor
Figure 1
NOTE: Supply wires
omitted for clarity
Figure 2
Figure 3
Hook
Ceiling
Motor
Assembly
Figure 4
No
less than
7 ft
Outlet Box
Junction Box
Screws (2)
Ceiling Bracket
Assembly