Servo Mode Partial Light Output Settings; Learn Function - Metz mecablitz 64 AF-1 digital Manual De Instrucciones

10.4.3
SYNC
M-Servo
• Press the sensor button
M-
m
Zoom 35
m
P
1/1
O
P
• Press sensor buttons
1/8 - 2/3
1/16
1/16 - 1/3
• Press the sensor button on the touch
p
q
SYNC
M-Servo
M-
k The partial light output is adopted.
Zoom 35 m
m
Once the slave flash units have achieved
flash-readiness, the AF measurement flash
P
1/16
flashes.
+
Remote channels cannot be set in SERVO
mode.
The camera flash unit may not work in the
remote mode.
190
Servo mode partial light output
settings
P
for partial light
output on the touch display as many times
as it takes for the partial light output
display to appear.
touch display and set the desired partial
light output to 1/1, 1/2, 1/8 to 1/256 .
display for the selected partial light output
1/16
(e.g. 1/16).
on the
+
+
10.4.4

Learn function

The "Learn function" enables individual auto-
matic adjustment of the slave flash unit to
the flash technology of the camera's flash
unit.
In the process, one or more pre-flashes, e.g.
to reduce the "red-eye effect" of the camera
flash unit can be taken into account.
The slave flash unit is then fired to coincide
with the main flash that illuminates the actu-
al picture.
If the camera's own flash device provides for
automatic focussing AF measuring flashes,
then due to the system characteristics no
learn operation is possible.
If possible, use another camera mode or
change to manual focussing.