Defining The Lighting Conditions (Ratio) For The Flash Groups On The Master Flash Unit - Metz mecablitz 64 AF-1 digital Manual De Instrucciones

10.1.4
The lighting conditions of the remote system
can be set to achieve particular lighting
effects. The lighting conditions for the master
(CTRL) and the groups (RMT, RMT2) are con-
trolled exclusively via the master flash unit.
Ratio activate / deactivate
• Press the
• Press the
PARAMETER
PARAMETER O
• Press the
CHANNEL
• Press the
RATIO
k
CONTROL
p
q
O
RATIO
• Press the
OFF
ON
184
Defining the lighting conditions
(RATIO) for the flash groups on the
master flash unit
D
button as often as it takes
for the selection menu to appear.
PARAMETER
sensor button on the
touch display.
sensor buttons on the
RATIO
touch display and select
RATIO
sensor button on the touch
display.
ON OFF
or sensor button on
the touch display and switch the
function on or off.
M
REMOTE
1/8
CTRL+
CTRL RMT RMT2
4 8
RATIO
RATIO
CTRL
RMT
RMT2
RTM2
.
4
8
16
q
M
REMOTE
1/8
CTRL+
RATIO
CTRL RMT RMT2
4 8
Defining the lighting conditions (RATIO
RATIO
• Press the sensor button on the
touch display.
1
O
• Press the sensor button on the touch
4
display for which a lighting condition is to
be set, in the example RMT2.
8
1
O
• Press the sensor buttons
touch display set the desired lighting con-
dition or switch off the lighting contribution
(--).
• Press the sensor buttons on the touch
p display for the desired correction value.
The setting is applied immediately.
8
RATIO
on the